Pushed to one repository · View In Graph Contained in tip

.DS_Store
		(Binary files differ)

AddSubscribers/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File AddSubscribers/​AddSubscribers.txt Stacked
	1 2 3 4 5 6	@@ -0,0 +1,6 @@ +AddSubscribers +Version 1.0.0.9 + +Allows regular fogbugz users to subscribe another user to a case. + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

AddSubscribers/​AddSubscribers_1.0.0.9.zip
		(Binary files differ)

Admin Event Notification/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Admin Event Notification/​Admin Event Notification.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16	@@ -0,0 +1,16 @@ +Admin Event Notification +Version 1.1 + +Forward admin notifications to e-mails and/or cases + +Allow for better monitoring of your FogBugz install, especially if the admin account is not used on a regular basis. + +This plugin has the following functions: + +- Send an email when an admin notification is triggered in FogBugz +- Send an email when an admin notification is resolved in FogBugz (manually or automatically resolved) +- Create a case when an admin notification is triggered in FogBugz; the case will be updated when the admin notification is resolved (manually or automatically resolved) + +Each of these options can be individually enabled or disabled in the plugin configuration + +This version requires FogBugz 8.6.50 or higher. \ No newline at end of file

Admin Event Notification/​admineventnotification.zip
		(Binary files differ)

AtomChat/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File AtomChat/​AtomChat.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18	@@ -0,0 +1,18 @@ +AtomChat +Version 1 + +AtomChat adds real-time chat to your FogBugz site. Your developers won't waste time emailing each other. + +AtomChat integrates seamlessly with your FogBugz site and adds dozens of new features including: + +- Instant text chat +- Voice/video chat +- Collaborative document sharing +- Screen-sharing +- File transfer and a lot more! + +Simply visit http://www.atomchat.com and register to start using AtomChat with your site! + +Installation takes only seconds and works out-of-the-box for all your developers. + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

AtomChat/​AtomChat.zip
		(Binary files differ)

AttachmentSidebar/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File AttachmentSidebar/​AttachmentSidebar.txt Stacked
	1 2 3 4 5 6 7 8	@@ -0,0 +1,8 @@ +AttachmentSidebar +Version 1.0.2 + +Lists a case's attachments on the left side of the case. + +Adds a sidebar to cases which lists and links to all of the attachments within the case. + +This version requires FogBugz 8.4.87 or higher. \ No newline at end of file

AttachmentSidebar/​AttachmentSidebar.zip
		(Binary files differ)

AutoSubscribe/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File AutoSubscribe/​AutoSubscribe.txt Stacked
	1 2 3 4 5 6 7 8 9 10	@@ -0,0 +1,10 @@ +AutoSubscribe +Version 1.0.4 + +You can have FogBugz auto subscribe you to new cases, wikis, and discussion topics. + +Allows you to have FogBugz automatically subscribe you to new cases in any project, or new discussion topics in any discuss group, or any wiki pages in any wiki. It also allows you to have FogBugz to subscribe you to ANY item (case, wiki, discussion) that you edit. + +The plugin creates a new menu item called "Subscribe" under "My Settings". + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

AutoSubscribe/​AutoSubscribe.zip
		(Binary files differ)

BugMonkey/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File BugMonkey/​BugMonkey.txt Stacked
	1 2 3 4 5 6 7 8	@@ -0,0 +1,8 @@ +BugMonkey +Version 2.0.1.16 + +Users can input any arbitrary javascript and css that you want to run on any FogBugz page. + +Create and control customizations for your FogBugz install by writing JavaScript and CSS to run on any FogBugz page or for a set of FogBugz users. + +This version requires FogBugz 8.2.22 or higher. \ No newline at end of file

BugMonkey/​BugMonkey.zip
		(Binary files differ)

BugRank/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File BugRank/​BugRank.txt Stacked
	1 2 3 4 5 6 7 8	@@ -0,0 +1,8 @@ +BugRank +Version 1.0.0.2 + +Simple plugin that allows you to enter a bug Urgency and Importance. A Rank is then given based on their multiplied value. + +Bug Columns are added for display and sorting purposes. + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

BugRank/​BugRank.zip
		(Binary files differ)

BugzTop/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File BugzTop/​BugzTop.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11	@@ -0,0 +1,11 @@ +BugzTop +Version 1.0.2.5 + +Allows you to add html to the top of a case. + +This is a simple plugin that allows you to enter arbitrary html at the top of all cases. + +Full information can be found here. +http://www.bitbounce.ca/products/bugztop/ + +This version requires FogBugz 8.3.42 or higher. \ No newline at end of file

BugzTop/​BugzTop.zip
		(Binary files differ)

Case Event Edit/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Case Event Edit/​Case Event Edit.txt Stacked
	1 2 3 4 5 6 7 8 9 10	@@ -0,0 +1,10 @@ +Case Event Edit +Version 1.1.1.28 + +Enables editing of existing case events. + +You can now edit existing case events! Fix typos, modify bug descriptions, add new repro steps, and more! + +All edits to every event are saved in your FogBugz case history, so you can make changes and fix mistakes without needing to worry about losing any important history. + +This version requires FogBugz 8.7.57 or higher. \ No newline at end of file

Case Event Edit/​CaseEventEdit.zip
		(Binary files differ)

Case Event Merge/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Case Event Merge/​Case Event Merge.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12 13 14	@@ -0,0 +1,14 @@ +Case Event Merge +Version 1.1 + +Display the case events of a duplicate in the original case + +The Case Event Merge plugin adds the functionality to display the case events of a duplicate case in the original case. + +When a case is marked as Resolved (Duplicate), the edit screen has an extra checkbox “show in other case” to indicate that you want the case events of this case displayed in the original case. + +Duplicate cases are often the result of an e-mail conversation with a customer. When you use this plugin to merge your cases, you can close the duplicate case and reply to the e-mail from the original case, regardless of the case the e-mail was originally received in. The reply will also be archived in the original case, effectively redirecting the conversation. + +This plugin will not copy, move or delete any case event. It will only display the merged events in the original case. A mistake can be easily corrected: just uncheck the checkbox (removing the events from the original case) or correct the duplicate case number (events will now be displayed in the “new” original case). + +This version requires FogBugz 8.6.50 or higher. \ No newline at end of file

Case Event Merge/​all.zip
		(Binary files differ)

Case Report/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Case Report/​Case Report.txt Stacked
	1 2 3 4 5 6	@@ -0,0 +1,6 @@ +Case Report +Version 1.1 + +Creates a full case report for each FogBugz Case that is included in the current filter. The report can be printed or saved to a .pdf document using the available browser options. + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

Case Report/​CaseReport.zip
		(Binary files differ)

Case Swiped Notification/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Case Swiped Notification/​Case Swiped Notification.txt Stacked
	1 2 3 4 5 6 7 8 9 10	@@ -0,0 +1,10 @@ +Case Swiped Notification +Version 1.1.2 + +Notifies a user when a case has been swiped from them. + +Sometimes cases are reassigned to other users, but the original user it was assigned to isn't aware that the case has been reassigned, and this can lead to duplication of effort. To help prevent this, the plugin sends an email notification to the user it was originally assigned to when the case is reassigned. + +After the plugin is installed, a user can enable the plugin for himself by going to My Settings -> Options, and setting Case Swipe Notification Plugin to "On". + +This version requires FogBugz 8.5.122 or higher. \ No newline at end of file

Case Swiped Notification/​CaseSwipedNotification.zip
		(Binary files differ)

Case to Salesforce/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Case to Salesforce/​Case to Salesforce.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12	@@ -0,0 +1,12 @@ +Case to Salesforce +Version 1.0.0.6 + +For cases created by incoming emails, create a task in Salesforce for the associated lead or contact that points back to the Fogbugz case. + +Provides very simple integration between Salesforce and Fogbugz. + +Incoming emails to Fogbugz create tasks in Salesforce. The task is associated with the lead or contact that has the same email address as the incoming email. If no email address match is found, no task is made. + +The task includes a direct link to the Fogbugz case and the original email. Further changes to the Fogbugz case are not recorded in Salesforce. You have to click through to the Fogbugz case to see that! + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

Case to Salesforce/​CaseToSalesforce.zip
		(Binary files differ)

Clark Kent/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Clark Kent/​ClarkKent.txt Stacked
	1 2 3 4 5 6 7 8	@@ -0,0 +1,8 @@ +ClarkKent +Version 1.1.3 + +The Superman of FogBugz time reporting. + +Simple time reporting of time spent against FogBugz cases. + +This version requires FogBugz 8.4.87 or higher. \ No newline at end of file

Clark Kent/​ClarkKent.zip
		(Binary files differ)

Code Snippets/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Code Snippets/​Code Snippets.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16	@@ -0,0 +1,16 @@ +Code Snippets +Version 1.0.0.25 + +Embed syntax-highlighted code snippets into wiki articles and bug events + +Adds the ability to embed syntax-highlighted code snippets into wiki articles, bug events, and Kiln code reviews. + +When editing a case, just wrap your code snippet in [code] ... [/code] or <code> ... </code> tags and you're all set! + +When editing a wiki article select Insert -> Code Snippet. + +To create inline code snippets, just keep everything on a single line: <code>my inline snippet</code>. + +Kiln (v2.2 and later) now supports code snippets as well! Just use the same tags as you would in FogBugz and everything should just work! + +This version requires FogBugz 8.2.22 or higher. \ No newline at end of file

Code Snippets/​CodeSnippets.zip
		(Binary files differ)

Community Case List/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Community Case List/​Community Case List.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16	@@ -0,0 +1,16 @@ +Community Case List +Version 1.0.1.5 + +Allows community users to view public cases of projects belonging to a common group with public submission enabled + +Provides a limited case list to community users via the "Case Status" link, and simple management of case tickets. + +For a project to become available for community users, it has to have public submission activated and belong to a group to which the communiy user has been granted at least read access. When the community user clicks on the "Case Status" link, he will see a list of projects available for listing above the ticket entry dialog. + +When clicking one of these projects, the community user is presented with a full-width case list showing all cases in the projects which have a ticket. Cases without tickets are never shown in this list. The information provided to the community user in the list is a little bit more than what the public user can see with the ticket: the list shows the category, the case ID, the area, the title, the version field, the priority and a simplified status (open/resolved/closed) grouped by milestone and ordered by date (newest first), priority and case number. All cases are linked and displayed via their short ticket (so that the normal "public case view" is triggered in FogBugz). + +When a community user views a case using a ticket in the list, he will have the project name (as link going back to the list) and the milestone name instead of the "submitted" message shown otherwise. This allows simple navigation back to the list. + +The plugin also adds simple ticket management to the case view for normal users. In the left pane of the case display, the current visibility of the case is displayed; "Public" if the case has a ticket and "Private" otherwise. When editing a case, users can choose to create or delete tickets. Note that deleting a ticket and re-creating it for the same case will not yield the old ticket, rendering old tickets invalid. + +This version requires FogBugz 8.0.32 or higher. \ No newline at end of file

Community Case List/​Sirius.CommunityCaseList.zip
		(Binary files differ)

Creately for FogBugz/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Creately for FogBugz/​Creately for FogBugz.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20	@@ -0,0 +1,20 @@ +Creately for FogBugz +Version 1.4.0.10148 + +Add UML, Flowcharts, Wireframes / UI Mockups, Mindmaps and more to Wikis and Cases + +- Use diagrams and charts to quickly and clearly explain project requirements +- Add, review and update diagrams within Cases or Wiki pages +- Support for many diagrams types including flowcharts, wireframes, UI mockups, mindmaps, UML diagrams and more +- Easily draw diagrams using the fully interactive web interface +- Get started quickly with 100's of templates for various diagrams types + +Go to http://www.youtube.com/watch?v=Sv3I3T_SmO4 to watch the demo video. + +Creately is developed by Cinergix Pty Ltd, an Australian company that builds online diagram & flowchart collaboration software. + +Install Help: https://creately.com/plugin/fogbugz/instructions/install + +Plugin Pricing Info: http://creately.com/plugin/fogbugz + +This version requires FogBugz 7.0 or higher. \ No newline at end of file

Creately for FogBugz/​CreatelyForFogBugz_1_4_0_10148.zip
		(Binary files differ)

Custom Fields/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Custom Fields/​Custom Fields.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11	@@ -0,0 +1,11 @@ +Custom Fields +Version 1.2.7 + +Allows administrators to add custom fields to cases + +If the case fields provided by FogBugz don't quite serve your needs, use the +Custom Fields Plugin to add a new one in a matter of minutes. The field can be any of several types including text, drop-down, and date/time. + +Once the custom field is created, you'll be able to edit the new field in the case view, see a new column in the grid view, and even filter results by possible field values. + +This version requires FogBugz 8.3.42 or higher. \ No newline at end of file

Custom Fields/​CustomFields-1.2.7.zip
		(Binary files differ)

Dependencies/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Dependencies/​Dependencies.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18	@@ -0,0 +1,18 @@ +Dependencies +Version 1.0.0.12 + +Adds dependency support for cases + +The FogBugz Dependency Plugin adds functionality to FogBugz to enable dependencies between cases: + +• Dependencies between cases can be added via the case view +• Cases can be filtered on the number of cases they are (directly) blocking +• Cases can be filtered on the number of unclosed dependencies +• Cases can be automatically reopened if closed with unmet dependencies +• Cases can be automatically reactivated when all dependencies are closed + +Quarantainenet has released the Dependency Plugin under a BSD license. + +In the ZIP-file, you'll find end user and developer manuals, as well as the full Visual Studio C# project. + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

Dependencies/​all.zip
		(Binary files differ)

DiscussPlus/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File DiscussPlus/​DiscussPlus.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67	@@ -0,0 +1,67 @@ +DiscussPlus +Version 1.0.9 + +Discuss Plus - Enhanced Discussion Board (Sponsored by: GROUPWARE, Inc.) + +Discuss Plus Plugin +=================== +This plug-in enhances the discussion features of FogBugz 7, by adding some additional capabilities and layout options. + +It is common for discussion topics to initiate FogBugz cases, for example when a customer complains about a bug or requests a feature. With the functionality of a standard Fogbugz installation, it is easy to build and link a case from a discussion topic, but support is limited for allowing the person who posted the message to keep track of the progress on the spawned case, especially if they are an anonymous or community user. This plug-in attempts to solve that. + +With this plug-in, the user can see the current status of the case and how recently it has been updated, without the necessity of the person working the case to continue to post replies in the thread to keep the user informed. + +Note: The ability to view case information for a post was always available to logged in users, this just expands that capability to anonymous and community users. + +There are also a number of features related to improving the display and searchability of the discussion forum. See the "Features" section of this document for a full list of capabilities associated with this plug-in. + +Installation +=========== +(1) Use the upload plugin button on the FogBugz plugin page and select the DiscussPlus.zip file you downloaded from the plugin gallery. + +IMPORTANT: You have to upload the entire zip file for the plugin to work. + +NOTE: To update from earlier versions, just upload the newest version, without uninstalling the current version. Uninstalling the plugin will delete all view counter data. + +(2) Have a site administrator go to the plugin configuration page from the Admin..Plugins FogBugz menu, +then clicking the congfigure link next to Discuss Plus +(3) Choose a title for the case details box like "Issue is being tracked" + +Optional: for every discussion group you wish to use with the new grid view: +(3) Plugin configuration page will display some HTML customized for your installation. Copy that HTML to the clipboard. +(4) Paste the HTML into the "Sidebar" section of each discussion group that you wish to use this plugin with. +so makes it easier to find relevant posts in a sortable grid view by popularity (view count), author, last update, number of comments and related case type. + +Features +======== +Discuss Plus enhances FogBugz discussion groups as follows: + +* Introduces a column sortable grid view for the topic list +* New grid view shows additional columns for View Count, Last Mod Date, and Spawned case icons (if any). +* Adds a view counter that tracks and displays how often a topic has been viewed. +* Each discussion post now shows a collapsible summary box of spawned case details +* Plugin permission settings allow to control which user types are allowed to see spawned case details. + + +Security Warning (IMPORTANT) +============================ +This plugin allows to expose related case information of discussion posts to public and community users, that they might not +otherwise have permission to see. + +Please carefully choose permission options in the plugin configuration AND TEST your configuration under different user scenarios (public, community, normal users, etc.) before enabling this plugin +in discussion groups for production. + + +Disclaimer +========== +The Discuss Plus plugin is developed by: +John Fuex +john.fuex@gmail.com +http://improvingsoftware.com + +It is designed and sponsored by: +GROUPWARE, Inc. - http://www.epdf.com + +This plugin is provided "AS IS", without explicit or implicit warranties. + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

DiscussPlus/​DiscussPlus_1_0_9.zip
		(Binary files differ)

Do Later/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Do Later/​Do Later.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11	@@ -0,0 +1,11 @@ +Do Later +Version 1.2.6 + +While editing a case, allows a user to schedule a reminder notification or other future event. + +Do Later allows you to set up two simple types of events within FogBugz: + +Notify Me - This will send a simple notification email to you at the time you specify, or more simply put, “a reminder.” +Activate & Assign To Me - At an appointed time, FogBugz will make sure the case is opened, activated, and assigned to you. You'll also receive a notification if you have them enabled. + +This version requires FogBugz 8.4.87 or higher. \ No newline at end of file

Do Later/​DoLater.zip
		(Binary files differ)

Email Users/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Email Users/​Email Users.txt Stacked
	1 2 3 4 5 6 7 8	@@ -0,0 +1,8 @@ +Email Users +Version 1.0.1.1 + +Adds an 'Email All Users' option to the Admin menu for sending broadcast emails to all FogBugz users. + +Allows FogBugz administrators to send email announcements to all normal users and administrators. + +This version requires FogBugz 8.0 or higher. \ No newline at end of file

Email Users/​EmailUsers.zip
		(Binary files differ)

EmailPrint/​.DS_Store
		(Binary files differ)

EmailPrint/​EmailPrint.Plugin.Release.1.0.0.6.zip
		(Binary files differ)

Change 1 of 1 Show Entire File EmailPrint/​EmailPrint.txt Stacked
	1 2 3 4 5 6 7 8	@@ -0,0 +1,8 @@ +EmailPrint +Version 1.0.0.6 + +Allows you to print individual emails from bug events. + +This plugin adds a "Print Email" link in the bugevent header when it's classified as an email in FogBugz. The link will provide a clean view of the email for printing. + +This version requires FogBugz 8.2.22 or higher. \ No newline at end of file

FB Scratchout/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File FB Scratchout/​FB ScratchOut.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12 13 14 15	@@ -0,0 +1,15 @@ +FB ScratchOut +Version 2.2.7 + +A Fogbugz plugin for deprecating bug events. + +FogBugz Scratchout Plug-in +=========================== +The purpose of this plug-in is to allow you to visibly deprecate events in the case history when using FogBugz without permanently deleting them. + +The most common scenarios where this might be useful are: +* History entries added to the wrong case. You no longer need to clutter the case further with a second "ignore that" entry. +* Clearly marking discussions that are no longer relevant because the resolution took a left turn and went in a different direction. This can really help testers quickly ignore irrelevant material when reading through the case to see what was changed. +* Any other mistakes or reasons that make you wish FB had a delete button. + +This version requires FogBugz 8.3.42 or higher. \ No newline at end of file

FB Scratchout/​FB_ScratchOut_2_2_7.zip
		(Binary files differ)

FNN/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File FNN/​FNN - FogBugz News Network.txt Stacked
	1 2 3 4 5 6 7 8 9 10	@@ -0,0 +1,10 @@ +FNN - FogBugz News Network +Version 1.4.3 + +FNN - FogBugz News Network (Extended Reporting) + +The FNN FogBugz plugin provides additional reporting functionality to FogBugz to better enable you to keep tabs on your projects. + +It also adds a working on indicator to the case-view. + +This version requires FogBugz 8.3.42 or higher. \ No newline at end of file

FNN/​FNN_1_4_3.zip
		(Binary files differ)

Filter Export/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Filter Export/​Filter Export.txt Stacked
	1 2 3 4 5 6 7 8	@@ -0,0 +1,8 @@ +Filter Export +Version 2.0.0.3 + +Export the cases matching your current filter to a CSV file. + +View a list of FogBugz cases offline by downloading the contents of the current case list filter in a MS Excel-compatible format (.CSV). + +This version requires FogBugz 8.2.22 or higher. \ No newline at end of file

Filter Export/​FilterExport.zip
		(Binary files differ)

FogBookz 4 Freshbooks/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File FogBookz 4 Freshbooks/​FogBookz 4 Freshbooks.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12 13 14	@@ -0,0 +1,14 @@ +FogBookz 4 Freshbooks +Version 1.1 + +FogBookz time interval integration with Freshbooks + +FogBookz 4 Freshbooks will save you time and money if you’re a company that uses Freshbooks.com for invoicing your employees time. FogBugz is an excellent way to track employees time spent working on specific cases. However, exporting that time into Freshbooks is just plain painful. + +Not anymore. FogBookz is here to bridge that gap and make exporting and importing that time tracked in FogBugz, into Freshbooks, a fast easy process. + +Using the power of FogBugz plugin technology, FogBookz adds the capability to administrator users to choose which time intervals tracked on cases are exported to Freshbooks; and to select which Freshbooks projects, tasks and employees each belong to. + +For full details please visit http://www.bitbounce.ca/products/freshbooks/ + +This version requires FogBugz 8.3.42 or higher. \ No newline at end of file

FogBookz 4 Freshbooks/​Freshbookz4FogBugz_1.1.0.0.zip
		(Binary files differ)

FogBookz 4 Quickbooks/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File FogBookz 4 Quickbooks/​FogBookz 4 Quickbooks.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12 13 14	@@ -0,0 +1,14 @@ +FogBookz 4 Quickbooks +Version 1.0.0.17 + +FogBookz time interval integration with QuickBooks + +FogBookz will save you time and money if you’re a company that uses QuickBooks for invoicing your employees time. FogBugz is an excellent way to track employees time spent working on specific cases. However, exporting that time into QuickBooks is just plain painful. + +Not anymore. FogBookz is here to bridge that gap and make exporting and importing that time tracked in FogBugz, into QuickBooks, a fast easy process. + +Using the power of FogBugz plugin technology, FogBookz adds the capability to administrator users to choose which time intervals tracked on cases are imported by QuickBooks; and to select which QuickBooks projects, employees and service items each belong to. + +For full details please visit http://www.bitbounce.ca/fogbookz/ + +This version requires FogBugz 8.0.32 or higher. \ No newline at end of file

FogBookz 4 Quickbooks/​Fogbookz4Quickbooks.zip
		(Binary files differ)

FogBugz Parature Bridge/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File FogBugz Parature Bridge/​FogBugz Parature Bridge.txt Stacked
	1 2 3 4 5 6 7 8	@@ -0,0 +1,8 @@ +FogBugz Parature Bridge +Version 1.0.0.1 + +A Fogbugz Plugin to update Parature when updates occured to linked bugz. + +Our customer support personnel use a product called Parature to manage our incoming support cases. Development prefers Fogbugz, and we don't want Support in there, messing with our Bugz. So, we built a bridge between the two systems, and query for Parature cases that need to be updated when our referenced Bugz are edited. + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

FogBugz Parature Bridge/​FogbugzParatureBridge.zip
		(Binary files differ)

FogBugz Report Generator/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File FogBugz Report Generator/​FogBugz Report Generator.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12	@@ -0,0 +1,12 @@ +FogBugz Report Generator +Version 1.2.0.4 + +This plugin automates status report generation for FogBugz projects. Given a date range, the report lists all of the cases worked on (and time spent on each) for each member on the project. + +This Plugin generates a status report in the Wiki based on time logged against cases and planned cases. + +In order to generate a report for a project you must first visit the configuration page for the Plugin (My Settings -> Status Report Generator) and specify a project, team name, cycle/week numbers, and which Wiki/WikiPage for the first status report. + +A status report is generated via Extras -> Status Report Generator which generates a wiki page (a sub-page of the WikiPage selected on the configuration page). + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

FogBugz Report Generator/​release.zip
		(Binary files differ)

FogBugz TimeSheet/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File FogBugz TimeSheet/​FogBugzTimeSheetPlugin.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12	@@ -0,0 +1,12 @@ +FogBugzTimeSheetPlugin +version 1.1 + +Provides extended reports from the WorkingOn timesheet information + +This plugin uses the information from the "WorkingOn" timeinterval and creates two reports - TimeSheetReport showing hours by person per project. +StatusReport - Showing BugEvents created in selected period. + +Documentation is available on our help site: +http://help.fogcreek.com/8907/timesheet-reports#fogbugztimesheet + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

FogBugz TimeSheet/​FogBugzTimeSheetPlugin.zip
		(Binary files differ)

Fogbridge for Salesforce/​.DS_Store
		(Binary files differ)

Fogbridge for Salesforce/​FogBridgeSalesForce.zip
		(Binary files differ)

Change 1 of 1 Show Entire File Fogbridge for Salesforce/​Fogbridge for Salesforce.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33	@@ -0,0 +1,33 @@ +Fogbridge for Salesforce +Version 1.2.5.18 + +Synchronize Fogbugz and Salesforce + +FogBridge for Salesforce is a bi-directional integration solution between FogBugz and Salesforce that keeps issues synced with any salesforce object. + + +Features: + +Sync Any Salesforce Object. +Sync existing cases or any object in Salesforce to FogBugz. +Save new cases in FogBugz to Salesforce. +Sync existing cases in FogBugz to Salesforce Cases. +Save New cases in Salesforce to FogBugz. +Automatically sync changes from FogBugz to Salesforce and vice-versa. +Set FogBugz Project, Milestone and Area inside of Salesforce when creating a new case. +Automatically sync existing FogBugz data with your new and existing Salesforce cases. +Link automatically and directly from FogBugz to Salesforce Account, Contacts, Cases, User, etc. +User mapping between FogBugz and Salesforce. +Status mapping between FogBugz and Salesforce. +Custom Fields mapping between FogBugz and Salesforce. +Choose the fields to show in the Save to Salesforce window. +Syncing comments improved. +Toggling of Bi-Directional syncing + + +Please Contact Software Allies for License, Installation or Configuration instructions. + +Contact us at: http://www.softwareallies.com/solutions/fogbridge/try-fogbridge-now +For documentation please visit us: https://softwareallies.jira.com/wiki/display/WIKI/1%29+Getting+Started + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

Igentics Plugins/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Igentics Plugins/​BugzExtension.txt Stacked
	1 2 3 4 5 6	@@ -0,0 +1,6 @@ +BugzExtension +Version 1 + +This plugin extends the Bug details by allowing you to add time intervals (from 30 mins up to whatever you want) against a bug. I wrote this plugin because we needed to be able to schedule when developers were going to work on tasks rather than just give them a deadlin. + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

Igentics Plugins/​Igentics.BugzExtension.zip
		(Binary files differ)

Igentics Plugins/​Igentics.ProjectExtension.zip
		(Binary files differ)

Igentics Plugins/​Igentics.hCalendarExport.zip
		(Binary files differ)

Change 1 of 1 Show Entire File Igentics Plugins/​ProjectExtension.txt Stacked
	1 2 3 4 5 6	@@ -0,0 +1,6 @@ +ProjectExtension +Version 1 + +This plugin adds a new field into the create project form to allow you to select areas to automatically create. The list of areas is limited to the ones I've added for our use but it makes it quicker to setup. I can provide the source for this module if required so you can change it to your own areas. The areas included are : INTERNAL, Account Management, Back End Development, Consultancy, Front End Development, Graphic Design, Setup and Configuration, Specification and Analysis, Testing and QA and Training and Documentation + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

Change 1 of 1 Show Entire File Igentics Plugins/​hCalendarExport.txt Stacked
	1 2 3 4 5 6	@@ -0,0 +1,6 @@ +hCalendarExport +Version 1 + +This plugin works with the Igentics.BugzExtension plugin to create an hCalendar feed from the schedule infomation. This can then be used with a tool such as http://h2vx.com/ics/ to produce a subscription that can be loaded into Outlook or Google Calendar. It's one-way only, you can't edit the items in Outlook but it's great for Project Management and Resourcing to be able to see who's due to work on what + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

Inline Image Attachments/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Inline Image Attachments/​Inline Image Attachments.txt Stacked
	1 2 3 4 5 6	@@ -0,0 +1,6 @@ +Inline Image Attachments +Version 1.3.1 + +Display image attachments in incoming email events inline, rather than at the bottom of the event. + +This version requires FogBugz 8.6.50 or higher. \ No newline at end of file

Inline Image Attachments/​InlineImageAttachments-1.3.1.0.zip
		(Binary files differ)

Kanban Board/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Kanban Board/​Kanban Board.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12	@@ -0,0 +1,12 @@ +Kanban Board +Version 2.2 + +A kanban board plugin for FogBugz. + +This plugin provides a Kanban board for FogBugz. + +A Kanban board is useful for visualizing what cases are being worked on and where they are in your development process. + +This plugin allows you to put cases in columns and assign them colors. This can be done via case editing or from the Kanban editor. While in the Kanban editor, cases can be dragged to change the order within a column or between columns. The editor's context menu allows easy adding or removing of cases and easy color changes. + +This version requires FogBugz 8.5.122 or higher. \ No newline at end of file

Kanban Board/​KanbanBoard-2.2.zip
		(Binary files differ)

Kiln Code Review Report/​.DS_Store
		(Binary files differ)

Kiln Code Review Report/​CodeReviewReport.zip
		(Binary files differ)

Change 1 of 1 Show Entire File Kiln Code Review Report/​Kiln Code Review Report.txt Stacked
	1 2 3 4 5 6	@@ -0,0 +1,6 @@ +Kiln Code Review Report +Version 1.1 + +Creates a full code review report, containing an individual report for each 'code review' included in the current FogBugz filter. The events, comments recorded for each code review are listed in chronological order. Any replies to each comment are nested under the pertinent comment. + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

Kiln Lock Down/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Kiln Lock Down/​Kiln Lock Down.txt Stacked
	1 2 3 4 5 6 7 8	@@ -0,0 +1,8 @@ +Kiln Lock Down +Version 1.2.1 + +Prevents access to Kiln for those who don't need it. + +Basically, you configure who can and cannot see the 'Kiln' tab at the top of the fogbugz master page. It doesn't have any logic to lookup repository access. + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

Kiln Lock Down/​KilnLockdown.zip
		(Binary files differ)

Milestone Management/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Milestone Management/​Milestone Management.txt Stacked
	1 2 3 4 5 6	@@ -0,0 +1,6 @@ +Milestone Management +Version 1.0.0.1 + +Moves the global milestone management from the project settings to the admin menu. This prevents the accidental creation of global releases in projects. + +This version requires FogBugz 7.0 or higher. \ No newline at end of file

Milestone Management/​Sirius.MilestoneManagement.zip
		(Binary files differ)

No Email Replies Per Day/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File No Email Replies Per Day/​No Email Replies Per Day.txt Stacked
	1 2 3 4 5 6 7 8	@@ -0,0 +1,8 @@ +No Email Replies Per Day +Version 1.0.0.1 + +Shows the number of emails responses made per day + +This plugin adds a new option to the "Extras" drop down menu which displays a HTML page of the number of email responses made per day historically. + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

No Email Replies Per Day/​NoEmailRepliesPerDay.zip
		(Binary files differ)

Notify/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Notify/​Notify.txt Stacked
	1 2 3 4 5 6 7 8	@@ -0,0 +1,8 @@ +Notify +Version 1.0.1.7 + +Adds a 'Notify More Users' field on case edits, allowing you to send changes and an edit message to more users. + +Traditionally, notification messages about changes only go to the assignee of the case and any subscribers. The Notify plugin allows the editor to notify any other FogBugz user of the change. + +This version requires FogBugz 8.2.22 or higher. \ No newline at end of file

Notify/​Notify.zip
		(Binary files differ)

Organizations/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Organizations/​Organizations.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38	@@ -0,0 +1,38 @@ +Organizations +Version 0.8.6.470 + +Adds an organization field to Fogbugz cases. + +About Organizations: + +Organizations is a very simple plugin that adds a hierarchal layer on top of projects in Fogbugz. In the same way that a project has a set of areas, an organization contains a set of projects. + +An organization is very similar to the Fogbugz group. The reason this plugin doesn't simply add to the functionality of groups is because all projects in a Fogbugz group share the same user access permissions. This plugin does not enforce visibility or access permissions based on a users organization, and it will never breach any Fogbugz group security settings. So you may use Organizations to classify your projects, and Fogbugz groups to establish user permissions for them. + + + +Plugin Compatibility: + +Due to extensive use of Javascript for manipulating the bug display page, backward and forward compatibility of this plugin is not guaranteed. The organizations plugin is currently compatible with: + +Version 8.6.50 (DB 786, Build 0) + + + +Plugin Features: + +- When creating a new case, a drop-down menu containing your organizations will appear before the project drop-down. The project drop-down gets sorted based on the selected organization, just like how the area drop-down is sorted based on project. +- Users can designate themselves as being part of a particular organization. +- You may filter by organization. +- A new case template system. These are text templates that can pre-populate your new case description field based on the selected organization of the case. + + + +Configuring Organizations: + +- Once you have the plugin installed, go to Admin -> Configure Organizations. +- Scroll down to 'Add an Organization' and add your desired organization names. +- Then go to 'Link a Project with an Organization', and pair all of your projects with their respective organizations. Note: If you don't link all of your projects with an organization, then the organizations drop-down menu will not appear! This is to keep projects from becoming inaccessible. +- You may now add new case templates for your organizations if you desire. + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

Organizations/​Organizations.zip
		(Binary files differ)

Original Opener/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Original Opener/​Original Opener.txt Stacked
	1 2 3 4 5 6 7 8 9 10	@@ -0,0 +1,10 @@ +Original Opener +Version 1.0.5 + +Allows searching and filtering for the original opener of a case. + +When you work with the "opener" of a case in FogBugz, if the case has been closed and re-opened, this is taken to mean the *most recent* opener. Out of the box, you cannot search or filter for cases based on the first person to open them. + +This plugin adds a sortable grid-column for cases' Original Opener as well as a search axis, "originallyopenedby:" and a filter option. Search works like the built-in "openedby:" axis: it does a sub-string match on the user's full name. This new axis also allows you to search for a person's numeric ID (ixPerson) by searching for originallyopenedby:"2" or originallyopenedby:"User 2". You can sort the Original Opener column by clicking its heading, or by putting 'orderby:"original opener"' in your search string. + +This version requires FogBugz 8.4.87 or higher. \ No newline at end of file

Original Opener/​OriginalOpenerPlugin.zip
		(Binary files differ)

Perforce DTG Integration/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Perforce DTG Integration/​Perforce DTG Integration.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12 13 14	@@ -0,0 +1,14 @@ +Perforce DTG Integration +Version 1.0.3 + +Allows integration with Perforce through the Perforce Defect Tracking Gateway. + +Allows deep integration between Perforce and FogBugz by mirroring FogBugz cases as Perforce Jobs. Using this plugin you can: + +* View FogBugz case details in Perforce +* Easily apply fixes to cases using Perforce without having to remember the case number +* See changelists in FogBugz and view them using P4Web + +This plugin requires installation of the Perforce Defect Tracking Gateway (p4dtg). + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

Perforce DTG Integration/​PerforceDTGIntegration-1.0.3.zip
		(Binary files differ)

Pretty Print/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Pretty Print/​Pretty Print.txt Stacked
	1 2 3 4 5 6 7 8	@@ -0,0 +1,8 @@ +Pretty Print +Version 1 + +Displays a grid of results in a nice prinatable format. + +Pretty print allows to print a nicely formatted view that shows in the current grid or list view. This result set may be from a predefined filter or a search result. + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

Pretty Print/​PrettyPrint.zip
		(Binary files differ)

Project Backlog/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Project Backlog/​Project Backlog.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12	@@ -0,0 +1,12 @@ +Project Backlog +Version 1.3.0.13 + +Maintain an Agile/Scrum backlog of cases for each project + +The Project Backlog (often called the "Product Backlog") is central to Scrum and Agile project management practices. It's essentially a feature wish list sorted by order of implementation. + +The Project Backlog Plugin allows you to manage a backlog without ever leaving the FogBugz grid view. You can assign a case an order in the backlog just by clicking on the case's "Backlog" column, and when the grid view is sorted by Backlog, a set of arrow controls appear allowing you to move cases up or down in the order with the click of a mouse. + +After you've installed the Project Backlog plugin, just add the "Project Backlog" column when you're looking at the grid view ("List Cases"), and then click on that column's header to sort things by their backlog value. + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

Project Backlog/​ProjectBacklog.zip
		(Binary files differ)

Project Groups/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Project Groups/​Project Groups.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43	@@ -0,0 +1,43 @@ +Project Groups +Version 1.0.0.1 + +Organize your projects into groups. + +FogBugz Project Groups +====================== +This plugin enhances the project management functionality of FogBugz. It adds the ability to organize each +FogBugz project into one or more Project Groups. + +For example, you could create a Project Group for each of your clients and add the relevant projects to each of them. + +Installation +=========== +Use the "upload plugin" button on the FogBugz plug-in page and select the ZIP file you downloaded from the plug-in gallery. + +IMPORTANT: You have to upload the entire zip file for the plug-in to work. + +Security +======== +Only site administrators can create Project Groups or modify their associations with projects. + +Features +===== +* Project Groups Administration Screen enables you to create, delete, and modify the projects assigned to each project group. (Accessible from the Admin dashboard, or the configure button on the FogBugz plugin screen.) +* The Project Edit Screen has been enhanced with a new section for managing the Project Groups associated with each project. +* Filtering by project groups is fully supported. +* Searching by Project groups is also supported via the ProjectGroup or ProjectGroups search axis. + +Example Search Axis Usage +ProjectGroup: "Group1" +ProjectGroups: "Group1" + +Note: The search axis label is NOT case sensitive. + + +Credits +------- +This plugin was created by John Fuex for Fog Creek Software. +Twitter: @johnFx +Blog: http://improvingSoftware.com + +This version requires FogBugz 8.4.87 or higher. \ No newline at end of file

Project Groups/​ProjectGroups.zip
		(Binary files differ)

Change 1 of 1 Show Entire File README.md Stacked
	1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18	@@ -0,0 +1,18 @@ +README +====== + +The plugin functionality of FogBugz has been deprecated. We are no longer creating or maintaining plugins. + +Plugins are __only available for FogBugz For Your Server__. Many of these plugins have been integrated into core functionalities of FogBugz On Demand and FogBugz On Site! Migrating to FogBugz On Demand or On Site is available for all For Your Server customers. You can check on your favorite plugin's status [here](http://help.fogcreek.com/fogbugz-performance-upgrade/fogbugz-on-demand-plugins) + +Installation +------------ + +### Step 1 +Download the plugin + +### Step 2 +In FogBugz, navigate to Admin > Plugins. Click "Upload Plugin" at the bottom-left and select the plugin zip file you downloaded in Step 1. + +### Step 3 +Any special instructions for implementing the plugin is included in the .txt file. \ No newline at end of file

Relative Time/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Relative Time/​Relative Time.txt Stacked
	1 2 3 4 5 6	@@ -0,0 +1,6 @@ +Relative Time +Version 1.1.5 + +Adds grid view columns for displaying the relative date/time of an event, e.g. 2 hours ago. + +This version requires FogBugz 8.8.39 or higher. \ No newline at end of file

Relative Time/​RelativeTime.zip
		(Binary files differ)

Show Subscribers/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Show Subscribers/​Show Subscribers.txt Stacked
	1 2 3 4 5 6 7 8 9 10	@@ -0,0 +1,10 @@ +Show Subscribers +Version 1.0.0.1 + +List the subscribers of case/article/discussion + +Lets you see all the subscribers of a case or a wiki article. + +Source code can be found at: http://vvv444.googlepages.com/fogbugz + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

Show Subscribers/​ShowSubscribers.bin.zip
		(Binary files differ)

TemplateNotifications/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File TemplateNotifications/​TemplateNotifications.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28	@@ -0,0 +1,28 @@ +TemplateNotifications +Version 1.0.0.5 + +Sends templated-based notification mails + +Allows creating template-based email notifications for case actions. Templates can contain special keywords for Fogbugz fields that will be substituted for the real values. Notifications can be configured per project and per action. + +Fields from the custom fields plugin are also supported. + +Does not affect in any way the "regular" Fogbugz email notifications. +To be able to receive notifications users must individually enable "Template Notifications" from the options screen. + +Note: Currently no emails are sent when cases are entered via public submission page or by community users. + +If running Fogbugz 8.3-8.6 this plugin works out of the box. + +UPGRADE WARNING (only for Fogbugz 8.7 or later): +Due to a change in the way that plugins are loaded in Fogbugz 8.7 running the plugin under this version requires some changes to your installation, specifically it requires taking the Custom Fields plugin out of the FogBugz appdomain. To do so: + +1. Find LicensedManifest.csv in C:\path\to\fogbugz\Plugins +2. Edit it and find the line for Custom Fields like this: "customfields@fogcreek.com,1.2.6.0" +3. Change the version 1.2.6.0 to something lower, e.g. 1.2.5.0 +4. Go to Admin -> Plugins in FogBugz and disable and re-enable Custom Fields +5. Verify that it's out of the appdomain by hovering over the name in the list. The tooltip should give you the ixPlugin value, but not say "In FogBugz AppDomain" + +After this the TemplateNotifications plugin should work. + +This version requires FogBugz 8.3.42 or higher. \ No newline at end of file

TemplateNotifications/​TemplateNotifications.zip
		(Binary files differ)

Tidy Case Events/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Tidy Case Events/​Tidy Case Events.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12	@@ -0,0 +1,12 @@ +Tidy Case Events +Version 3.4 + +Hides subtext-only "Edited by..." events and adds a link on the left panel to restore them. Due to its surprising nature, this must be enabled on a per-user basis via the User Options page. + +This plugin is inspired by the mentality that, while case audit trails are important, some case events are generally inconsequential in the scope of the audit history. The Tidy Case Events plugin is not meant for everyone, but aims to provide a nice enhancement for users of FogBugz who follow certain use patterns. + +Tidy Case Events will automatically hide all case events of type "Edited by..." which contain no attachments or text. Hidden events can be temporarily restored by clicking on a link on the left panel of the case view page. + +Tidy Case Events can be toggled on a per-user basis with a default of "Off." Administrators may also bulk toggle Tidy Case Events via the plugin configuration page. + +This version requires FogBugz 8.7.57 or higher. \ No newline at end of file

Tidy Case Events/​TidyCaseEvents.zip
		(Binary files differ)

Time Interval Example/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Time Interval Example/​Time Interval Example.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12	@@ -0,0 +1,12 @@ +Time Interval Example +Version 0.2.0.1 + +Adds a comment field for time intervals added via the Working On drop-down + +*Note:* This plugin was written as an example to assist a customer. It works as designed, but the scope is limited. If you would like to extend it, the source is available on developers.kilnhg.com: http://bit.ly/TimeIntervalComments + +This plugin allows you to put a comment on each time interval in FogBugz. It adds a [comment] link in the timesheet editor. Clicking it brings up a dialog where you can enter a note describing what you did for the time interval. There is currently no additional interface for viewing the comments. + +The plugin uses some javascript hackery to modify the timesheet editor since there is no plugin interface available to change its functionality. As such, it works with FogBugz 8.7, has not been tested with 8.8 and may break with changes in the DOM and internal javascript in FogBugz. + +This version requires FogBugz 8.0 or higher. \ No newline at end of file

Time Interval Example/​TimeIntervalExample_0-2-0-1.zip
		(Binary files differ)

Time Report/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Time Report/​TimeReport.txt Stacked
	1 2 3 4 5 6 7 8 9 10	@@ -0,0 +1,10 @@ +TimeReport +Version 1.14.23.30 + +Provides a report of user's time by case. + +Provides a rich time reporting interface for reviewing time logs historically, generating time reports against custom filtering criteria, and optionally managing weekly time cards. + +A License is required. To apply for a free alpha testing license, contact fogbugz-plugin-support@dimagi.com . + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

Time Report/​TimeReport_1_14_23_30.zip
		(Binary files differ)

URLTrigger/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File URLTrigger/​URLTrigger.txt Stacked
	1 2 3 4 5 6 7 8 9 10	@@ -0,0 +1,10 @@ +URLTrigger +Version 1.2.2 + +Allows FogBugz events to trigger HTTP requests. + +The URLTrigger Plugin allows you to specify a request to be sent to a specific URL when events occur in FogBugz. To create a URLTrigger, select one or more events that your trigger will respond to, then add values to the URL querystring using a list of variables presented by the plugin. + +More details about this plugin can be found at http://help.fogcreek.com/7755/ + +This version requires FogBugz 8.0.32 or higher. \ No newline at end of file

URLTrigger/​urltrigger-1.2.2.0.zip
		(Binary files differ)

User Group Filter/​.DS_Store
		(Binary files differ)

User Group Filter/​FBUserGroupFilter.zip
		(Binary files differ)

Change 1 of 1 Show Entire File User Group Filter/​User Group Filter.txt Stacked
	1 2 3 4 5 6 7 8	@@ -0,0 +1,8 @@ +User Group Filter +Version 1.0.0.1 + +Adds User Group filter and axes (UserGroup and ixUserGroup) + +Creates a case filter option for user groups, allowing you to view all cases assigned to any users that are members of a security group. Also adds search axes for the name and group id. + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

Vacation Calendar/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Vacation Calendar/​Vacation Calendar.txt Stacked
	1 2 3 4 5 6 7 8	@@ -0,0 +1,8 @@ +Vacation Calendar +Version 1.0.0.1 + +A Calendar that displays the working schedule for a given month + +A Vacation Calendar that shows Group Holidays as well as individual holidays for the purposes of evaluating who's in the office. + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

Vacation Calendar/​VacationCalendar-Final.zip
		(Binary files differ)

Wider Cases/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Wider Cases/​Wider Cases.txt Stacked
	1 2 3 4 5 6 7 8 9 10	@@ -0,0 +1,10 @@ +Wider Cases +Version 1.1 + +Makes the individual case view wider than the default + +The FogBugz individual case view too narrow for you? This plugin will make it 25% wider so it better fills your wide-screen monitor. + +Wider Cases shouldn't be used with FogBugz 7.3+ since it clashes with FogBugz 7.3's case resize ability. + +This version requires FogBugz 7.0 or higher. \ No newline at end of file

Wider Cases/​WiderCases.zip
		(Binary files differ)

Wiki Article Case Relationships/​.DS_Store
		(Binary files differ)

Wiki Article Case Relationships/​FogBugzWikiCaseRelations_v3.0.1.0.zip
		(Binary files differ)

Change 1 of 1 Show Entire File Wiki Article Case Relationships/​Wiki Article Case Relationships.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18	@@ -0,0 +1,18 @@ +Wiki Article: Case Relationships +Version 3.0.1 + +Allows cases to be easily tied to wiki articles. + +This plugin allows you to conveniently tie cases and wiki articles together. + +From any FogBugz case, you can add a new wiki article by clicking on the "New Article" link. The newly created wiki article is then tied to the case and is listed under “Related articles” for easy access. + +From a wiki article, you can create new FogBugz cases, view all FogBugz cases that are currently linked to the article, or attach an existing FogBugz case to the article. You can also detach a related FogBugz case from the wiki article any time. + +Using the "Filtered Case List" wikiblock, you can embed a dynamically filtered list of FogBugz cases anywhere within your wiki article content. + +For more information about this plugin, +visit our Knowledge Base at +https://devmental.fogbugz.com/default.asp?W3 + +This version requires FogBugz 8.0.32 or higher. \ No newline at end of file

Wiki Article Index/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Wiki Article Index/​Wiki Article Index.txt Stacked
	1 2 3 4 5 6 7 8 9 10	@@ -0,0 +1,10 @@ +Wiki Article Index +Version 1.7 + +An insertable article index for your wikis. + +This plugin adds a widget that you can insert into a FogBugz wiki to display an article index. + +It is very similar to the Fog Creek "Wiki Page Table of Contents" plugin, except that it creates a table of contents listing all articles in the wiki, instead of a listing of headers within the same wiki article. + +This version requires FogBugz 8.4.87 or higher. \ No newline at end of file

Wiki Article Index/​WikiArticleIndex_1_7_0.zip
		(Binary files differ)

Wiki Article Table of Contents/​.DS_Store
		(Binary files differ)

Wiki Article Table of Contents/​TableOfContents.zip
		(Binary files differ)

Change 1 of 1 Show Entire File Wiki Article Table of Contents/​Wiki Article Table of Contents.txt Stacked
	1 2 3 4 5 6 7 8	@@ -0,0 +1,8 @@ +Wiki Article Table of Contents +Version 1.0.0.6 + +Auto-generates a table of contents for wiki articles and provides the $toc$ template placeholder. + +Once this control is inserted into a wiki page, it automatically displays a hierarchical table of contents (toc) based on the relative size of the headers contained in wiki page content. + +This version requires FogBugz 8.0 or higher. \ No newline at end of file

Wiki Comments/​.DS_Store
		(Binary files differ)

Wiki Comments/​Comments.zip
		(Binary files differ)

Change 1 of 1 Show Entire File Wiki Comments/​Wiki Comments.txt Stacked
	1 2 3 4 5 6 7 8 9 10	@@ -0,0 +1,10 @@ +Wiki Comments +Version 1.0.13 + +Add commenting functionality to wiki articles. + +Wiki Comments integrates with the FogBugz 8 Wiki to provide a lightweight commenting feature for wiki articles. + +Inserting Wiki Comments into an article provides a mechanism for readers to share their thoughts and have discussions without needing to edit the article itself. + +This version requires FogBugz 8.0.32 or higher. \ No newline at end of file

Wiki Local Index/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Wiki Local Index/​Wiki Local Index.txt Stacked
	1 2 3 4 5 6	@@ -0,0 +1,6 @@ +Wiki Local Index +Version 1.0.0.1 + +This plugin creates a nested article index based on the wiki hierarchy. The index shows all articles beneath the current page and one level of articles beneath those. + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

Wiki Local Index/​WikiLocalIndex.zip
		(Binary files differ)

Wiki Release Notes Plugin/​.DS_Store
		(Binary files differ)

Change 1 of 1 Show Entire File Wiki Release Notes Plugin/​Wiki Release Notes Plugin.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12 13 14	@@ -0,0 +1,14 @@ +Wiki Release Notes Plugin +Version 1 + +Show Release Notes in Wiki Page + +Publishes the release notes for a selected milestone into a Wiki article. + +Uses H2 for the milestone title, and H3 for the release notes. + +Optionally allows you to include an entry for cases without Milestones. + +Does not filter by status. + +This version requires FogBugz 7.3 or higher. \ No newline at end of file

Wiki Release Notes Plugin/​WikiReleaseNotesPlugin.zip
		(Binary files differ)

Workflow/​.DS_Store
		(Binary files differ)

Workflow/​Workflow-1.3.2.3.zip
		(Binary files differ)

Change 1 of 1 Show Entire File Workflow/​Workflow.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12	@@ -0,0 +1,12 @@ +Workflow +Version 1.3.2.3 + +Allows customization of the FogBugz case workflow. + +Out-of-the-box, FogBugz provides an intentionally simple workflow for case resolution and closure. We have four category types, each with a single "Active" status and a few different "Resolved" statuses. As a rule, cases are automatically assigned back to the case opener upon resolution. We use this simple workflow at Fog Creek Software, but recognize that some customers would like to tweak their case workflow to suit their unique work processes. + +The Custom Workflow Plugin is designed to provide you with an exceptional level of flexibility. You can start by configuring existing case categories, or creating brand new ones. + +For each category, you can then specify a set of active and resolved statuses. Lastly, you can create a FogBugz "Workflow," which we formally define as "a set of rules for case assignment based on case status." Any number of Workflows can be created, and each FogBugz project can be assigned an individual Workflow that matches the team's working style. + +This version requires FogBugz 8.6.50 or higher. \ No newline at end of file

qTrace/​.DS_Store
		(Binary files differ)

qTrace/​QASymphony.FogBugzPlugins.Workflow.zip
		(Binary files differ)

Change 1 of 1 Show Entire File qTrace/​qTrace.txt Stacked
	1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36	@@ -0,0 +1,36 @@ +qTrace +Version 1.0.0.1 + +Automatically Documents Intelligent Screenshots of a Defect with Seamless Submission to FogBugz + +1. qTrace - The Screen Capture Tool with Intelligence + +qTrace is an innovative screen capture tool that helps testers easily submit clear and accurate defect tickets. +• Captures both screen shots and users' actions +• Intelligently generates step-by-step narration of the test scenario +• Generates a stand-alone document or submits a case directly to FogBugz +• Available as a free and commercial edition + +2. Flexible recording modes - Take a snapshot or record every screen and step + +Testers can take a quick snapshot of a single screen, record a single defect flow, or record an entire test session. qTrace also generates a text narration of the test steps that can be used as the defect description. + +3. Annotate – Edit a little or a lot + +Testers can modify and annotate the captured screenshots and decide how much or how little additional detail is needed. Annotation tools let testers highlight screen areas, add callout text, crop portion of the screen, and blur out sensitive information. + +4. Integrated – Submit tickets directly to FogBugz + +qTrace supports both on-demand and on-premise versions of FogBugz. This seamless integration between qTrace and FogBugz allows testers to configure which fields they want to submit with a case, specify default values for fields and enforce new-case workflow rules (enabled via this plugin). + +5. So what does it cost? + +qTrace is available both as a Free edition as well as a $49 Pro edition. +• The Free edition is great for occasional users +• Frequent users would benefit by upgrading to the Pro edition + +As a Fog Creek Software's customer, you can use the promotion code FOGCR33K to receive a $10 discount. + +qTrace can be downloaded from http://www.qasymphony.com + +This version requires FogBugz 7.3 or higher. \ No newline at end of file